Step 1) Open the Control Panel
First, click on the Start button and click "Control Panel". This opens up the "Control Panel Home."



Step 2) Go to "Network and Internet" panel
Next, click on the "Network and Internet" control panel, which is circled in red below.



Step 3) Connect To A Network
Next, click on "Connect to a network".



Step 4) Set up a VPN connection
The next screen may not look quite like this if you have networks already defined. In any case, click on "Set up a connection or Network."



Step 5) Choose the Connection Type
On the next screen, click on "Connect to a workplace" then click "Next."



Step 6) Select the Internet Connection
Next click "Use my Internet connection (VPN)".



Step 7) Enter the server information
Now, enter the server information.



In the text box labelled "Internet address" ( highlighted in blue) type "vpn1.myprivacy.cc". This is the Internet address of the SecureNET™ servers.

Step 8) Enter your SecureNET™ username and password
In this screen, enter your SecureNET™ username and password.


In the text box labelled "User name:" (highlighted in blue), enter your SecureNET™ username.

In the text box labelled "Password:" (highlighted in yellow), enter your SecureNET™ password.

Optionally, check the "Remember this password" checkbox (highlighted in green) and you won"t have to enter your password when you connect to SecureNET™.

Then, click the "Create" button.

Step 9) Connection Ready
You should see this screen next. Click the "Close" button to return to the "Network and Internet" screen.



Step 10) Set the connection location
The first time you connect to SecureNET™, you might see a screen like this one. Windows is asking you if you want to automatically connect to SecureNET™ whenever you're at a given location. If you want to connect to SecureNET™ automatically when you're at a public hotspot, click "Public location".

However, you probably should click "Cancel", because most public locations require you to click through an agreement before you can access the Internet — meaning that any connection you attempt will fail. Instead, you should just connect manually.



Connect to SecureNET™
To connect to SecureNET™, go to the Start buton and click "Connect To".



Then click on the SecureNET™ entry and click "Connect".